posted by Eric on Jan 26
Here are some more plans on how to build a deer stand. These are pretty simple deer stand plans. It’s drawn on grid paper where each grid represents 1 foot x 1 foot.
How To Build A Deer Stand
You should use 1.5″ wood screws to attach the plywood to the braces. These plans were sent to me by e-mail and I haven’t seen any instructions to go along with them. I’m assuming the 2×4’s are split in half to make 2×2’s to use for the braces. The sloped roof isn’t necessary but it can increase the lifespan of the deer stand by helping water to drain off of the rofo instead of sitting there soaking into it. If you put a metal/tin roof on, a slope isn’t important and the life of the stand will be increased even more.
posted by Eric on Jan 18
There is a new DIY design on how to build a deer stand over at the deer stand plans homepage. If you have been wanting to know how to build a deer stand, check it out. It is an entire step-by-step instruction book with plans, pictures, and tips for every step of the way.
The blind is put together modularly so it is easily transportable. To build a deer stand with these plans, it takes less than 3 hours and less than $140 in materials. Once the main panels are assembled, they fit in the bed of a pickup. You can put the panels together on site in about 15 minutes with just a power drill and some screws.
From what I have found on the internet, these are the best plans on how to build a deer stand available.
Click here to get a copy of the plans.
